Monarch Series
by Weishaupt (UK) Limited
Model number: WM-GL10/2-A ZM-R VSD
Manufacturer
Weishaupt (UK) Limited
Neachells Lane
Willenhall
West Midlands
Email weishaupt.co.uk Telephone 01902 609841
Features
- Technology
- Boiler Retrofit Equipment
- Subtechnology
- Burners With Controls
- Date added to ETL
- 15 November 2018
- Product category
- Gas fired and dual fuel burners rated between 401 kW and 1200 kW
- Max Rating (kW)
- 630
- Min Rating (kW)
- 75
- Natural gas
- Yes
- Gas oil
- Yes
- Light fuel oil
- Yes
- Heavy fuel oil
- No
- LPG
- Yes
- Propane
- Yes
- Kerosene
- Yes
- Bio-diesel
- Yes
- Residual oil
- No
- Tallow Oil
- No
- Other fuel types
- N/A
- Turndown ratio
- 6:1
- Exhaust gas oxygen level at 100% Load (%)
- 1.9
- Exhaust gas oxygen level at 50% Load (%)
- 1.9
- Exhaust Gas oxygen level at 25% load (%)
- 4.8
- Exhaust gas CO level (maximum recorded) (ppmv)
- 17.0
- Is the product fitted with dampers that fully close on burner shutdown?
- Yes
- Is the product a forced draught burner?
- Yes
- Does product modulate output continuously, or in a stepwise manner across at least 3 outputs?
- Yes
- Is the product fitted with a burner heat input control system which is amplitude modulating or frequency modulating (by pulse firing)?
- Yes
- Does the product conform to the requirements of The Pressure Equipment (Safety) Regulations 2016 in respect of its design, manufacturer and testing procedures, or have an appropriate Conformity Assessment mark?
- Yes
- Does product use any form of mechanical linkage between the modulating fuel valve, and its air damper or air control valve, to adjust the product’s air to fuel ratio?
- No
- Does the product enable compliance with the minimum requirements as stated in Annex II of the Medium Combustion Plant Directive (EU) 2015/2193 as implemented in UK domestic law, without the need for flue gas recovery?"
- No
- Does the product incorporate a microprocessor based burner control system?
- Yes
- Is a precision servomotor used to control the dampers or control valves which are used to modulate air or fuel flow to the burners?
- Yes
- Does product use a use a variable speed motor controller (or variable speed drive) to operate its forced draught fan
- Yes
Uniclass codes
Code | Title |
---|---|
Pr_60_60_10_03 | Atmospheric gas burners |
Pr_60_60_10_29 | Forced draught dual fuel burners |
Pr_60_60_10_30 | Forced draught gas burners |
Pr_60_60_10_65 | Pre-mix gas burners |